Grandstream Networks GXP2120 - Figure 4: Web GUI - Phonebook->Contacts; Figure 5: Click-To-Dial

FIRMWARE VERSION 1.0.5.24 GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL Page 71 of 77
Figure 4: Web GUI - Phonebook->Contacts
Figure 5: Click-to-Dial
SAVING THE CONFIGURATION CHANGES
After users makes changes to the configuration, press the "Save" button will save but not apply the
changes until the "Apply" button on the top of web GUI page is clicked. Or, users could directly press
"Save and Apply" button. We recommend rebooting or powering cycle the phone after applying all the
changes.
REBOOTING FROM REMOTE LOCATIONS
Add contacts.
Edit contact.
Click to call this contact
from the phone.
Click to dial from
available lines.