FIRMWARE VERSION 1.0.5.24 GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL Page 65 of 77
Sets up the periodic inform interval to send the inform packets to the ACS.
Connection Request
Username
The user name for the ACS to connect to the phone.
Connection Request
Password
The password for the ACS to connect to the phone.
The port for the ACS to connect to the phone.
The Cert File for the phone to connect to the ACS via SSL.
The Cert Key for the phone to connect to the ACS via SSL.
Configuration via Keypad
Menu
Configures the access control for the users to configure from keypad Menu.
There are three different options:
Unrestricted. All the options can be accessed in keypad Menu.
Basic settings only. The CONFIG option will not display for users to
access in keypad Menu.
Constraint Mode. CONFIG, FACTORY FUNCTIONS and NETWORK
options will not display for users to access in keypad menu.
Enable STAR key
Keypad locking
If set to "Yes", the keypad can be locked by pressing and holding the STAR *
key for about 4 seconds. A lock icon will show indicating the keypad is locked.
The default setting is "Yes".
Note:
When the keypad is locked, users would need press and hold the STAR * key
for about 4 seconds again and then enter the password to unlock it.
Configures the password to lock/unlock the keypad. The password field allows
number with up to 32 characters.
SSL Certificate used for SIP Transport in TLS/TCP.
SSL Private key used for SIP Transport in TLS/TCP.
SSL TLS Private Key
Password
SSL Private key password used for SIP Transport in TLS/TCP.
Download Device
Configuration
Click to download the device configuration file in .txt format.
PHONEBOOK PAGE DEFINITIONS
Specify Contact’s First Name, Last Name, Phone Number, Accounts and
Groups to add one new contact in phonebook.
To Next Page
Loading...
Need help?
General
