Offhook Auto Dial
Configures the User ID/extension to dial automatically when the phone is off-hook. The phone will use
the first account to dial the configured numbers out.
The default setting is “No”.
Offhook Auto Dial
Delay (s)
Defines the timer for warm line dialing. After the timer expires, the phone system will dial the
configured number in Off-hook Auto Dial automatically. If it is not configured, the configured number
will be dialed immediately.
Off-hook/On-hook
Timeout (s)
If configured, the phone will exit the dial-up screen when timeout after Offhook or Onhook. default is
30s.
The valid range is 10-60s.
Handset Option
Configures the Handset options and can be set to:
1.
If set to “Enable”: when off hook, the phone will enter into the dial screen, and the media channel
will switch to the handset; no matter if any third app is opening.
2.
If set to “Disable”: The Handset will be disabled.
3.
If set to “Auto”: when the 3rd-party application is calling, only the media channel will switch to the
handset when off hook; otherwise, the phone will enter into the dial screen, and the media
channel will switch to the handset.
Default setting is “Auto”.
Auto Unhold When
Pressing Line Key
Configures when there are multiple lines, whether to UnHold the line automatically when click the line
being held and hold the line in the primary call.
Note: the hold situation which is set manually will not be put on hold automatically. The default setting
is “No”.
Virtual Account
Group Avaya Mode
If set to “Yes”, when processing SIP Register 3XX Response, it will parse the address site in 3XX, modify
the account server info “SIP Server: port” & “SIP Transaction” in virtual account group and initiate
registration again. This feature is designed for the Avaya customers.
Virtual Account
Group Concurrent
Registration
Configures the amount of concurrent accounts in virtual account group. If the total amount of virtual
group accounts is “N”, the number of accounts the user sets is “n”, then the phone will register the
first n accounts; If registration for all of these accounts failed, then register the last N-n accounts.
The default value is 2.
Filter Characters
Sets the characters for filter when dial out numbers. Users could set up multiple characters. For
example, if set to “[()-]”, when dial (0571)-8800-8888, the character “()-“ will be automatically filtered
and dial 057188008888 directly.
Escape '#' as %23 in
SIP URI
Determines which characters will be included in the SIP INVITE URI if end users input #. If it is set to
“Yes”, the phone will replace the # by %23. Otherwise, it will include # in the SIP INVITE message.
Default is “Yes”.
Default Phone APP
Configures phone APP for the device. The default setting is Phone of Grandstream, but if you develop
a new phone application using SDK, you can choose the new one to replace the original. The
configuration of “Quickly Launch 3rd Party APP” is not available if the default phone application
changes.
Quickly Launch
Specified APP
Selects the specified application that launch quickly by offhook/clicking the Dial or Conference. Once
selected, the package name and activity of specified application will be displayed below. When user
offhooks / click the Dial or Conference application, it will automatically enter the configured
application interface. The default setting is blank, which means using GS phone application.
To Next Page
Loading...
Need help?
General
