P a g e | 35
HT812/HT814 Administration Guide
Version 1.0.9.3
Always Skip the Firmware
Check
Configures the HT812/HT814 to skip the firmware check, when this option is
selected the HT812/HT814 will always skip searching for a new firmware.
Disable SIP NOTIFY
Authentication
Disables the SIP NOTIFY Authentication on the ATA adapter. If set to “Yes”,
the ATA adapter will not challenge NOTIFY with 401. Default is No
Authenticates configuration before being accepted. This protects the
configuration from unauthorized modifications. Default is No.
Validate Server
Certificates
This feature allows users to validate server certificates with our trusted list of
TLS connections. Default is enabled.
The device needs to reboot after changing the setting.
Specifies SSL certificate used for SIP over TLS is in X.509 format. The
HT812/HT814 has built-in private key and SSL certificate.
Specifies TLS private key used for SIP over TLS is in X.509 format.
SIP TLS Private Key
Password
Specifies SSL Private key password used for SIP Transport in TLS/TCP.
Custom Certificate
(Private Key + Certificate)
Allows users to update to the device their own certificate signed by custom
CA certificate to manage client authentication.
Sets the ATA adapter system to enable the “CPE WAN Management
Protocol” (TR-069). Default setting is No.
Specifies URL of TR-069 Auto Configuration Servers
(e.g., http://acs.mycompany.com), or IP address.
Enters username to authenticate to ACS.
Enters password to authenticate to ACS.
Sends periodic inform packets to ACS. Default is No
Sets frequency that the inform packets will be sent out to ACS.
Connection Request
Username
Enters username for ACS to connect to the HT812/HT814.
Connection Request
Password
Enters password for ACS to connect to the HT812/HT814.
To Next Page
Loading...
Need help?
General
