P a g e | 61
HT812/HT814 Administration Guide
Version 1.0.9.3
UPGRADING AND PROVISIONING
The HT812/HT814 can be upgraded via TFTP/FTP/FTPS/HTTP/HTTPS by configuring the URL/IP Address
for the TFTPFTP/FTPS/HTTP/HTTPS server and selecting a download method. Configure a valid URL for
TFTP or FTP/FTPS or HTTP/HTTPS (default is HTTPS); the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com
fw.ipvideotalk.com/gs
Firmware Upgrade procedure
Please follow below steps in order to upgrade the firmware version of your HT812/HT814:
1. Access your HT812/HT814 UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Advanced Settings Firmware Upgrade and Provisioning page, and enter the IP
address or the FQDN for the upgrade server in "Firmware Server Path" field and choose to
upgrade via TFTP or HTTP/HTTPS or FTP/FTPS.
5. Make sure to check “Always Check for New Firmware”.
6. Update the change by clicking the " Apply" button at the bottom of the page. Then "Reboot" or
power cycle the HT812/HT814 to update the new firmware.
Figure 14: Firmware Upgrade Page
To Next Page
Loading...
Need help?
General
