P a g e | 49
HT812/HT814 Administration Guide
Version 1.0.9.3
Specifies which end will act as refresher for outgoing calls.
Default is Omit.
UAC: The HandyTone acts as the refresher.
UAS: Callee or proxy server act as the refresher.
Specifies which end will act as refresher for incoming calls. Default is Omit.:
UAS: The HandyTone acts as the refresher.
UAC: Callee or proxy server act as the refresher.
Uses INVITE message to refresh the session timer. Default is No.
Appends “100rel” attribute to the value of the required header of the initial
signaling messages.
Default is No.
Add Auth Header on Initial
REGISTER
Adds “Authentication” header with blank “nonce” attribute in the initial SIP
REGISTER request.
Default is No.
Allows users to manually configure the conference URL. The default is null.
Use First Matching Vocoder
in 200OK SDP
Includes only the first matching vocoder in its 200OK response, otherwise it
will include all matching vocoders in same order received in INVITE.
Default is No.
Configures vocoders in a preference list (up to 8 preferred vocoders) that will
be included with same order in SDP message. Vocoder types are G.711 A-
/U-law, G.726-32, G.723, G.729, iLBC and OPUS
Transmits a specific number of voice frames per packet. Default is 2;
increases to 10/20/32/64 for G711/G726/G723/other codecs respectively.
Operates at specified encoding rate for G.723 vocoder. Available encoding
rates are 6.3kbps or 5.3kbps.
Default is 6.3kbps.
Specifies iLBC packet frame size (20ms or 30ms). Default is 20ms.
Disable OPUS Stereo in SDP
Disables OPUS stereo in SDP. Default is No.
Determines payload type for iLBC. Valid range is between 96 and 127.
Default is 97.
Determines payload type for OPUS. Valid range is between 96 and 127.
Default is 123.