REC API – ACCESS CALL RECORDING FILES
REC API URL FORMAT
The format of the HTTPS request for the REC API is as below. This is used to request call recordings, or
a list of recording files within the Asterisk spool directories, matching given parameters as set by the third
party application.
https://[UCM IP]:[Port]/recapi?[option1]=[value]&[option2]=[value]&...
By default, the port number for the API is 8443.
REC API URL PARAMETERS
REC API takes two parameters: filedir and filename. Both parameters are optional, and the response
depends on which parameters are included in the request.
Case 1: Neither parameter is set.
Example Request:
https://192.168.254.200:8443/recapi
Response:
A CSV file listing all directories under ast_config_AST_SPOOL_DIR.
Case 2: Only filedir is set.
In this case, multiple file directories are supported, separated by '@'.
Example Request:
To Next Page
Loading...
Need help?
General
