Grandstream Networks UCM6102 Instruction Manual

The purpose of this configuration guide is to describe the steps needed to configure
the Grandstream UCM6102 IP-PBX for proper operation with Optimum Business
SIP Trunking.
Goal
V 1.4 3
Prerequisites
Please follow the instructions in the Optimum Business SIP Trunk Set-up Guide. The
Set-up Guide was left by the Optimum Business technician at installation. If you do
not have the Set-up Guide, go to www.optimumbusiness.com/SIP to download
a copy.
This knowledge base solution provides the configuration steps for both PBX
registration and static or non-registration modes of PBX operation.
PBX Information
Manufacturer: Grandstream Networks
Model: UCM6102
Software Version: 1.0.4.7
Does the PBX send SIP Registration messages (Yes/No)? Ye s
Grandstream UCM6102 Configuration
The steps below describe the basic configuration required to enable the
Grandstream UCM6102 IP-PBX to use Optimum Business SIP trunking for inbound
and outbound calling. Please refer to the Grandstream UCM6102 documentation for
other advanced PBX features.
The configuration described here assumes that the PBX is already configured
and operational with station side phones using assigned extensions or DIDs. This
configuration is based on Grandstream UCM6102 version 1.0.4.7.
UCM6102 IP PBX

Grandstream Networks UCM6102 Specifications

General

Brand	Grandstream Networks
Model	UCM6102
Category	PBX
Language	English