Grandstream Networks UCM6302A Basic Configuration Guide

P a g e | 23
UCM6XXX Basic Configuration Guide
Figure 24: Analog Trunks – Create New Analog Trunk
Note: If there are reports of calls being dropped and lines are not disconnecting properly, this could mean that
there are line settings mismatched. The UCM6XXX series offers an auto detect feature that tests the line and
provides the best possible settings. This option is called “PSTN Detection” which can be found under the Analog
trunk configuration page.
VoIP Trunks
VoIP trunks can be configured under Web GUI  Extension / Trunk ->VoIP Trunks. Once created, the VoIP
trunks will be listed with Provider Name, Type, Hostname/IP, Username and Options to edit/detect the trunk.
 Click on "Create New SIP Trunk" or “Create New IAX Trunk” to add a new VoIP trunk.
 Click on to configure detailed parameters for the VoIP trunk.
 Click on to configure Direct Outward Dialing (DOD) for the VoIP Trunk.
 Click on to start LDAP Sync.

Grandstream Networks UCM6302A Specifications

General

Brand	Grandstream Networks
Model	UCM6302A
Category	PBX
Language	English