Grandstream Networks UCM6304A User Manual

P a g e | 105
UCM630xA Series User Manual
Version 1.0.9.10
NTP Server
The UCM630xA can be used as an NTP server for the NTP clients to synchronize their time with. To configure
the UCM630xA as the NTP server, set "Enable NTP server" to "Yes" under Web GUISystem SettingsTime
SettingsNTP Server. On the client side, point the NTP server address to the UCM630xA IP address or host
name to use the UCM630xA as the NTP server.
Office Time
On the UCM630xA, the system administrator can define "office time", which can be used to configure time
condition for extension call forwarding schedule and inbound rule schedule. To configure office time, go to Web
GUISystem SettingsTime SettingsOffice Time. Click on "Add" to create an office time.
Figure 48: Create New Office Time
Table 22: Create New Office Time
Start Time
Configure the start time for office hour.
End Time
Configure the end time for office hour
Week
Select the workdays in one week.

Grandstream Networks UCM6304A Specifications

General

Brand	Grandstream Networks
Model	UCM6304A
Category	PBX
Language	English