UCM6510 CDR Report and CDR API Guide
CDR API URL FORMAT AND PARAMETERS
The format of the HTTPS request for the CDR API is as below.
https://[UCM IP]:[Port]/cdrapi?[option1]=[value]&[option2]=[value]&...
By default, the port number for the API is 8443.
The options included in the request URI control the record matching and output format. For CDR
matching parameters, all non-empty parameters must have a match to return a record. Parameters can
appear in the URI in any order. Multiple values given for caller or callee will be concatenated. The
following table shows the parameter list used in the CDR API.
Table 3: CDR API URI Parameters
Define the format for output of matching CDR rows.
Default is csv (comma separated values).
Number of records to return. Default is 1000, which is
also the maximum allowed value.
Number of matching records to skip. This will be
combined with numRecords to receive all matches
over multiple responses. Default is 0.
Comma separated extensions,
ranges of extensions, or regular
expressions.
Example:
caller=5300,5302-5304,_4@
-OR-
caller=5300&caller=5302-
5304&caller=_4@
(Matches extensions 5300,
5302, 5303, 5304, and any
extension containing 4 as the
second digit/character).
Filters based on src (caller) or dst (callee) value,
matching any extension contained in the parameter
input string.
Patterns containing one or more wildcards ('@' or '_')
will match as a regular expression, and treat '-' as a
literal hyphen rather than a range signifier. The '@'
wildcard matches any number of characters (including
zero), while '_' matches any single character.
Otherwise, patterns containing a single hyphen will be
matching a range of numerical extensions, with non-
numerical characters ignored, while patterns
containing multiple hyphens will be ignored. (The
pattern "0-0" will match all non-numerical and empty
strings).
To Next Page
Loading...
