UCM6510 CDR Report and CDR API Guide
Date and/or time of day in any of
the following formats:
YYYY-MM-DDTHH:MM
YYYY-MM-DDTHH:MM:SS
YYYY-MM-DDTHH:MM:SS.SSS
(literal 'T' character separator in
above three formats)
HH:MM
HH:MM:SS
HH:MM:SS.SSS
now
DDDDDDDDDD
Filters based on the start (call start time) value. Calls
which start within this period (inclusive of boundaries)
will match, regardless of the call answer or end time.
An empty value for either field will be interpreted as
range with no minimum or maximum respectively.
Strings without a date have a default value of 2000-01-
01. Strings without a time of day have a default value
of of 00:00 UTC, while strings with a time of day
specified may also optionally specify a time zone
offset - replace '+' in time zone offset with '%2B' (see
http://www.w3.org/TR/NOTE-datetime).
Number (duration in seconds)
Filters based on the billsec value, the duration
between call answer and call end.
EXAMPLE QUERIES
The following illustrates the format of queries to accomplish certain requests. In most cases, multiple
different queries will accomplish the same goal, and these examples are not intended to be exhaustive,
but rather to bring attention to particular features of the CDR API connector.
Query 1: Request all records of calls placed on extension 5300 which last between 8 and 60 seconds
(inclusive), with results in CSV format.
https://192.168.254.200:8088/cdrapi?format=CSV&caller=5300&minDur=8&maxDur=60
-OR-
https://192.168.254.200:8088/cdrapi?caller=5300&minDur=8&maxDur=60
To Next Page
Loading...
