123 Gastro
Combi
Incorrect upwards
movement of the hood
The hood has not
reached up within 20
seconds. The alarm is
activated even if the
hood remains in the up
position.
Check if the tap for incoming cold water
is open and the water flow is sufficient.
Check the hydraulic system, especially
the booster pump and the solenoid
valve, hood up.
124 Gastro
Combi
The crush protector has
been activated
Something is preventing
the hood to move down.
High friction in
mechanical system of
the hood motion
Remove whatever is obstructing the
hood movement, reload the wash gods
in the basket if necessary.
Check the mechanical system of the
hood motion.
125 Gastro
Combi
Incorrect hood
movement, safety sensor
The safety sensor has
not signalled to the
control unit within 5
seconds of the hood
being raised from the
tank.
Check if the hood yoke can activate the
safety sensor and if the safety sensor is
intact. Check the cold water inlet to the
machine and the correct rotation of the
booster pump. Check the function of the
solenoid valve, hood up
128,
129,
130, 131
System error, control
card non operational
A control card
component is broken.
132 All Clean Level sensor
The level sensor in wash
tank may be dirty, or
water in wash tank have
not been totally drained
at start up if the machine
has been shut down for
more than 4 hours.
Empty the wash tank and clean the level
sensor in the wash tank.
140 All Temperature sensor in
wash tank or rinse tank
non operational
The temperature sensor
in the wash tank or rinse
tank is broken.
Cut machine power wait 30 seconds,
turn power back on. If Error persists,
Replace the temperature sensor in the
wash tank or rinse tank.
142 Combi The sensor for detecting
of wash ware out of
order
No signal or false signal
from the proximity
switch detecting the
basket.
Check the distance between the
proximity switch and the magnets build
in the plastic basket ring. Check the
condition of the magnetic proximity
switch
To Next Page
Loading...
