Need help?Do you have a question about the GRAPHTEC GL400 and is the answer not in the manual?
General| Model | GL400 |
|---|---|
| Number of Channels | 4 |
| Resolution | 16-bit |
| Type | Data Logger |
| Sampling Speed | 10 ms/channel |
| Storage Media | SD card |
| Interface | USB |
| Power Source | AC adapter, rechargeable battery |
Compact, lightweight data loggers with PCMCIA slot for data capture and PC connectivity.
Details input, display, data capture, and control/processing features of the logger.
Specifies ambient conditions, temperature/humidity ranges, and unsuitable locations for operation.
Precautions for accurate temperature measurement, including air vent and warm-up considerations.
Information on LCD display variations and screen saver function for the GL400 monitor.
Instructions on how to switch the display language between English and Japanese.
Procedure to inspect the GL400/350's external casing for scratches or dirt after unpacking.
List of standard and optional accessories to verify inclusion after unpacking.
Identifies and describes the function of each part on the GL400/350 unit.
Details the various display areas and indicators on the GL400 monitor.
Explains the function of each button on the GL400/350 control panel.
Instructions for connecting the GL400/350 to a PC via LAN or USB cable.
Step-by-step guide for connecting AC or DC power and powering on the unit.
Information on mounting and using the optional battery pack for data backup.
Procedure for inserting and removing PCMCIA cards, with precautions against static electricity.
Instructions for attaching and detaching the input terminal units, ensuring power is off.
Details on connecting signal input cables to various input terminal unit types.
Crucial safety guidelines to prevent electrical shocks and shorts during measurement.
Methods to connect chassis GND and minimize noise interference for accurate measurements.
Explanation of connecting the logic alarm cable and its functions.
Details on external trigger and pulse input functions, including voltage ranges and thresholds.
Overview of control panel keys for basic measurement and settings on the GL400.
Detailed explanation of QUIT and MENU key functions for advanced settings.
How to replay captured data, perform waveform search, and statistical calculations.
Lists the necessary hardware and software specifications for installing the application.
Step-by-step guide for installing and updating the USB driver for PC connectivity.
Instructions for establishing PC connection via LAN or USB cable, including connection methods.
Procedure for installing the OPS022 application software and system setting tools.
How to configure IP address, Device ID, and other settings using Configuration Tools.
Overview of the OPS022 software's main menu and selection options.
Configuration for connecting the GL400/350 to a computer via USB or TCP-IP (LAN).
Setting device and measurement parameters like AMP, Logic/Pulse, X-Y, Span, and Scaling.
Options for displaying data, including Waveform View (Single/Dual) and X-Y display.
Details general specifications for GL400/350, including input, memory, PC interface, and monitor.
Lists functional specifications like display modes, sampling interval, scaling, and trigger functions.
Information on control software and battery pack (option) specifications.
Provides dimensional drawings and measurements for the GL400 and GL350 models.
To Next Page