Software
4-27
Waveform View
The waveform view "Y-T" display can be selected as "Single View" or "Dual View". When the GL400/
350 is in on-line status, the measured waveforms are always displayed. Moreover, when data capture
has been started, the data is captured according to the settings made in the setting menus.
Y-T
Measurements can be displayed with respect to the time axis.
(1) Single View Display
The X axis is the time axis, and the Y axis displays the measurement range specified for each
channel.
Y Axis Range 1, 2: The Y axis scale can be displayed as the scale for two channels.
Channel If a channel's color display is clicked to turn it off, the waveform for that
channel will not be displayed.
X-axis Display Width: The time axis width can be changed if the numeric value is changed.
Note: Measurement data is captured.
(2) Dual View Display
Data captured in the past can be displayed alongside the data that is currently being captured.
Note: This function can only be used while data is being captured.
Past data can be enlarged and checked using the on-screen cursors.
When the display is Dual View, the cursor
display can be used to search data.
Cursor, Enlarge/Compress,
Move Display, Auto Scale
To Next Page
Loading...