Software
4-9
4.4 Installing OPS022
This section describes how to install the application software and the system setting tools used to control and
set the GL400/350.
(1) Insert the GL400/350 User Guide CD-ROM provided into the PC CD-ROM drive.
(2) Click the Taskbar's Start button, then click the Run... icon to open the "Run" window.
(3) Enter the CD-ROM drive name and \English\OPS022\SETUP.EXE as the name of the file you
wish to open. If the disk is in drive D, for example, enter "D\English\ OPS022\SETUP.EXE" in
the box to launch the installer.
(4) Continue, following the instructions on the screen.
CHECKPOINT
Be sure to observe the following points when connecting the GL400/350 to a PC.
• Do not connect any devices apart from a mouse or a keyboard to any of the other USB terminals on
your PC.
• Set the PC's power-saving functions to Off.
• Set the Screen Saver to Off.
• Set the anti-virus software auto update and scan scheduler functions to Off. Also, set the Windows
auto update and scheduler functions to Off.
To Next Page
Loading...