4-34
Software
Convert Then Save
After data has been converted, click the "Convert Then Save" button to display the following
submenu.
(1) Format
GBD: GL400/350 dedicated binary format.
Note: Use this format if you want to replay the captured data via the OPS022 software.
CSV: A TXT format for processing data in Excel.
Note: If data is converted using this format, data analysis using the OPS022 software cannot be
performed.
(2) Path: Specifies the data capture location for the converted data.
(3) Data
All: All the measured data is converted.
Cursor: Only the data between the A and B cursors is converted.
(4) Spot Samples
Off: Spot sampling is not performed
2, 5, 10, 20, 50, 100, 200, 500, 1000: Data is sampled at the point interval specified.
To Next Page
Loading...