3-6
Settings and Measurement
(4) MENU
Open the settings window to capture data. For details on settings, see "3.4 Setting
Menus".
(5) QUIT (LOCAL)
This key is primarily used for the following operations.
• To cancel a setting during menu configuration.
• To return to the MONITOR window when the SPAN/TRACE/POSITION window is
displayed.
• To cancel remote status (in which keys are disabled) through interface control.
• To close the menu screen.
• To quit data replay.
• To return the Enlarged Waveform Screen/Digital + Calculation Display Screen to
the Waveform + Digital Screen.
(6) Direction keys
This key is primarily used for the following operations.
• To move a menu or setting item during menu configuration.
• To move the cursor during replay.
• To move the active channel in the Waveform + Digital screen (up/down keys).
• To change the setting of SPAN/TRACE/POSITION (left/right keys).
To Next Page
Loading...
