3-10
Settings and Measurement
(12) CURSOR (ALARM CLEAR)
<When replaying captured data>
This key is used to toggle between cursors A and B during replay.
<When alarm generated>
When the alarm setting is “Hold generated Alarm”, the maintained alarm is cleared.
(13) FILE
• This key is use for operations related to the Internal memory and USB device
(copy and delete).
• Copies the window.
• Saves data between cursor A and cursor B during replay (can be set during
replay only)
• Saves or reads the currently set condition into the USB device.
cursor A
cursor A
cursor B
cursor B
Alarm-generated channels
Alarm output terminal status
・Black : Alarm is not issued
・Red : Alarm is issued
To Next Page
Loading...
