Settings and Measurement
3-13
(2) Capturing
During data capture, data is captured into the Internal memory or USB device.
You cannot use the MENU key to change the setting.
Operations available during capture
(3) Dual View Replaying
You can replay data during capture.
Waveform on the right side is the current captured data and the left side is previously captured
data. You can use the Direction keys (left/right) to move the cursor to captured data to check digital
values.
Operations available during dual view replaying
CAUTION
Captured data can only be displayed for the double window buffer portion.
Dual view buffer capacity is 512 KB.
Time of Capturing
Capture file name
Capture time
Note: "+++++:++:++" is displayed when the capture time is long.
SPAN/TRACE/POSITION The SPAN/TRACE/POSITION key is used to change settings.
Display mode The DISPLAY key is used to change the display mode.
Dual View replay
The REVIEW key is used to replay captured data in two windows at the same time.
Moving cursor The CURSOR key is used to switch between cursors A and B.
The left/right or FAST FORWARD keys are used to move the cursors.
Screen buffer usage rate (orange line)
To Next Page
Loading...
