3-8
Settings and Measurement
USB Drive Mode Operation Procedure
1. Use a USB cable to connect the GL800 and a PC.
(When the USB driver has not been installed, install it as described in the software manual
"Installing the USB Driver".)
2. Connect the USB device to the GL800.
3. While pressing the GL800 START/STOP key, turn the power ON.
4. The external storage media is recognized by the PC and data exchange becomes possible.
(10) REVIEW
This key is used to replay captured data.
• During Free Running, replays captured data.
The screen used to specify the data replay source file appears; specify the file
you want to replay.
• While capturing data, recently captured data is replayed in two windows.
To Next Page
Loading...
