4-2
Specifications
4.1 Standard Specifications
Standard Specifications
Item Description
Number of analog input 1 unit (20 channels) or extension unit (maximum 200 channels)
External input/output
Trigger input, Logic input 4 channels or Pulse input 4 channels, Alarm output
PC interface Ethernet (10BASE-T/100BASE-TX), USB (HighSpeed supported) provided
as standard features
Internal memory devices Internal memory: approx. 12 MB
USB memory slot (FullSpeed supported) is provided as a standard feature
Data backup functions Setup conditions: EEPROM; Clock: lithium secondary battery
Operating environment 0 to 45°C, 5 to 85% RH (15 to 40°C when using batteries)
Withstand voltage Between each input channel and GND terminal : 1 minute at 350 Vp-p
Between each input terminal : 1 minute at 350 Vp-p
Power supply AC adapter: 100 to 240 VAC, 50/60 Hz
DC input: 8.5 to 24 VDC
Battery pack (option): 7.2 VDC (2200 mAh), 2 packs mountable
Power consumption AC power consumption (when the supplied AC adapter is used)
DC power consumption
* Normal status is when LCD brightness is set to MAX.
External dimensions 232 x 152 x 50 mm
Weight*
1
990 g
Vibration-tested conditions Equivalent to automobile parts Type 1 Category A classification
*1 Excluding the AC adapter and battery. Including one terminal unit.
No. DC voltage Condition Normal
Consumption during
consumption
battery recharge
1 +24 V When the LCD is ON 0.3 VA 0.7 VA
2 +24 V
When the screensaver is operating
0.2 VA 0.6 VA
3 +12 V When the LCD is ON 0.55 VA
Recharging not possible
4 +12 V
When the screensaver is operating
0.3 VA
Recharging not possible
5 +8.5 V When the LCD is ON 0.8 VA
Recharging not possible
6 +8.5 V
When the screensaver is operating
0.45 VA
Recharging not possible
No. Condition Normal
Consumption during
consumption
battery recharge
1 When the LCD is ON 16 VA 28 VA
2 When the screensaver is operating 11 VA 22 VA
To Next Page
Loading...
