Settings and Measurement
3-31
• Save current settings/Load settings Saves or loads main unit condition settings.
Folder/File: Specify a folder when Name Type is set to Auto.
Specify the file name when the Name Type is set to User.
Name Type: Specifies how to name a file.
• Auto: Automatically uses the capture start time as the file name.
• User: Sets to a user-defined name.
File format is fixed to CND.
File box
The file box used to set captured data files using the DATA menu or for disk operations accessed
using the FILE menu is operated as follows.
<File box by disk operations> <File box using the DATA menu>
Key Description
Change the operation of the file box.
Show properties ................. Display details of a file or folder.
Select file/folder .................
Select files or folders to write data.
Create new folder .............. Create a new folder.
Create new file ................... Create a new file.
Rename ............................. Change the file or folder name.
Copy file/folder ................... Copy files or folders.
Select file to copy/delete .... Select the file to copy or delete.
Select copy destination and copy .
Select the copy destination and copy.
Delete file/folder ................. Delete files or folders.
Change file sort order ........ Change the order in which files are displayed.
View setting ....................... Change displaying information for files.
Format disk ........................ Format the disk.
* Details of allowed operation will depend on the operation target.
Moves between folders.
: Move up one folder.
: Move down one folder.
ENTER Finalize the operation.
QUIT Close the file box.
To Next Page
Loading...
