3-34
Settings and Measurement
• Operation
Data replay menu
Data replay menus are displayed by pressing the MENU key during replay.
Setting Selections available
• Move to First Data
• Move to Last Data
Cursor Position • Move to Center
• Move to Selected Position
Method : Position, Time
Move to : Relative time (position only)
: Absolute time (time only)
Cursor Sync Off, On
• CH : CH1 to 200, Pulse, Logic, Alarm
• Mode
Analog : H, L
Pulse : H, L
Data Search Logic : H, L
Alarm : Both, H, L
• Level : Level: set numeric value (selectable only when analog or pulse)
• Next Search
• Prev. Search
Statistical Calculation • Statistical Calculation : Off, Average, Max, Min, Peak, RMS
between cursors • Execute
Operation mode Description Operation method
Text input A Upper case alphabet mode When the cursor key is moved to the uppermost part,
a Lower case alphabet mode operation can be selected using the left/right key. After
0 Numeric mode selecting an operation, use the down key to move the
+ Symbol mode cursor to the desired character.
← Delete mode
↓ Insert mode
OK Finalize mode
When selecting operation Text used for each operation When you bring the cursor to a character and press
ENTER, the character is entered. After you finish
entering characters, move the cursor to OK and
then press ENTER.
To Next Page
Loading...
