LDX 86 HS/XS HiSpeed/XtremeSpeed HD camera User’s Guide (v1.0) 23
Chapter 2 - Installation
• Attach the microphone holder (2) onto the viewfinder and secure it with the knurled screw
(3).
• Guide the viewfinder cable along the front of the camera and attach it to one of the cable
clips.
2.2.2 Positioning the viewfinder
The horizontal position of the viewfinder can be adjusted as follows to suit your requirements:
• Loosen the locking ring (1). As seen from the rear of the camera, turning the locking ring
counterclockwise moves it towards the handgrip.
• Slide the viewfinder horizontally along the rail to the desired position.
• Tighten the locking ring (1) by turning clockwise.
The viewfinder can be positioned backwards and forwards along the camera axis:
• Loosen the support bracket round bar retaining lever (3).
• Slide the round bar (2) forwards or backwards.
• When the desired position is reached tighten the round bar retaining lever (3) again.
1
3
2
1
2 3
4
To Next Page
Loading...
