90 LDX 86 HS/XS HiSpeed/XtremeSpeed HD camera User’s Guide (v1.0)
Chapter 6 - Camera menu reference
6.4 Creative Control menu
Menu item Values Default Level File Description
Levels
Filters
ND Filter Clear, ND 1/4 ,
ND 1/16, ND 1/64
Clear User 2 Scene Selects optical Neutral Density (ND) filter:
Clear = No filter; ND 1/4 = 2 stops; ND 1/16 =
4 stops; ND 1/64 = 6 stops neutral.
FX Filter Clear, Star 4P,
Sft Fcs, Cap
Clear User 2 Scene Selects optical Effects (FX) filter: Clear = No
filter; Star 4P = 4 Point Star; Sft Fcs = Soft
Focus; Cap = Lens capped.
Contrast
Contrast On, Off Off User 3 Scene Switches Contrast adjustment on or off.
Shadows 0..99 50 User 3 Scene Adjusts contrast level in the shadows area.
Midtones 0..99 50 User 3 Scene Adjusts contrast level in the midtones area.
Highlights 0..99 50 User 3 Scene Adjusts contrast level in the highlights area.
Knee (in PowerCurves mode)
Knee Off, Var, Auto Off User 2 Scene Selects Knee:
Auto = automatic ; Var = variable; Off = Knee
is switched off.
Knee Type Y, N A M Y User 3 Scene Selects source signal on which Knee acts:
Y = luminance; NAM = Non Additive Mix: level
of the highest RGB component.
Point 0%..90% 35% User 3 Scene Knee point: this is the video output level
where compression begins.
Fade Level 0..99 0 User 3 Scene Fades between a linear (99) and a Knee (0)
compression curve (when Knee = Var).
Limit Out 100%..109% 100% User 3 Scene Sets maximum output video level after
compression.
Max In 100%..800% 200% User 3 Scene Sets maximum input video level.
Saturation Off, On Off User 3 Scene Switches color saturation above Knee on or off.
Saturation Lvl 0..99 50 User 3 Scene Sets color saturation level above Knee.
Advanced
Knee Mode Compat,PwrCurves
PwrCrves
Service Scene Selects Knee Mode: Compatibility or
PowerCurves.
Auto Ref 0..99 30 Service Scene Sets the reference level for Knee (when Knee
= Auto)
Knee (in Compatibility mode)
Knee Off, Var, Auto Off User 2 Scene Selects Knee:
Auto = Automatic Knee; Var = Variable Knee;
Off = Knee is switched off.
Knee Type Y, N A M Y User 3 Scene Selects source signal on which Knee acts:
Y = luminance; NAM = Non Additive Mix (level
of the highest RGB component, use this
setting for highly saturated pictures).
Slope M 0..99 50 User 3 Scene Sets the Knee slope (when Knee = Var).
Point M 0..99 60 User 3 Scene Sets the Knee point (when Knee = Var).
Advanced
To Next Page
Loading...
