LDX 86 HS/XS HiSpeed/XtremeSpeed HD camera User’s Guide (v1.0) 53
Chapter 4 - Operating instructions
Go to the OPERATOR TOOLBOX > USER BUTTONS > BUTTONS menu to assign user buttons to
intercom functions:
• SW1—assigns a function to user button SW1: Call, Ext1, Ext2, Prod, Eng, Select.
• SW2—assigns a function to user button SW2: EIris, Zoom, FocAst, Ext1, Ext2, Prod, Eng.
• VTR Lens—assigns a function to the VTR Lens button: Prod, Eng, Zoom, Ext1, Ext2.
• Handgrip Left—assigns a function to the left side button underneath the camera
handgrip: Prod, Eng.
• Eng Mode—selects switching mode for the engineering channel selection button at the
back panel of the camera: momentary (push) or alternating (toggle).
4.10.6 Setting up Tracker headset
Go to the CONFIGURATION > INTERCOM > TRACKER menu to change settings for the Tracker
headset.
Function Values Default Description
Tra cke r M i c To O ff, Ca m , E n g , Pr o d ,
All
Off Selects the Tracker microphone routing.
Tracker Mic Gain 0 dB, 40 dB 40 dB Selects gain of camera Tracker’s intercom
microphone.
Tracker Mic Pwr Off, On Off Switches bias tee power (12 VDC) to the Tracker’s
microphone on or off.
Tracker Mic Src Eng, Side Side Selects Engineering channel or Tracker’s microphone
sidetone for tracker’s headphone.
To Next Page
Loading...
