36 LDX 86 HS/XS HiSpeed/XtremeSpeed HD camera User’s Guide (v1.0)
Chapter 4 - Operating instructions
4.4 Controlling the camera
There are several ways to control the camera:
• Using the operational switches on the camera;
• Using the camera menu to select functions;
• Using an Operational Control Panel (OCP 400) connected to the C2IP network or XCU;
– Refer to the OCP 400 User’s Guide for detailed operating instructions for the OCP 400.
• Using a Master Control Panel (MCP 400) connected to the C2IP network or XCU;
If you cannot access some camera functions or you wish to restrict access, refer to “Access
and security” on page 58.
4.4.1 Navigating the camera menu
The camera menu can be viewed in the viewfinder (or connected monitors) and navigated by
means of the rotary control and the select and back buttons which are located at the front and
left of the camera:
The functions of the camera are grouped into a structure of menus and sub-menus. Each of the
menus gives you access to a particular group of functions. Spend some time using the controls
and menus to discover the various functions. You will quickly learn to operate the camera
intuitively.
Some of the menu items may not appear if the user level is not set to 3.
Menu select
button
Menu rotary
control
Menu back
button
To Next Page
Loading...
