LDX 86 HS/XS HiSpeed/XtremeSpeed HD camera User’s Guide (v1.0) 91
Chapter 6 - Camera menu reference
Knee Mode Compat,
PwrCurves
PwrCrves
Service Scene Sets Knee Mode: Compatibility or
PowerCurves.
Knee Limit 0..99 99 Service Scene Selects the level above which the Knee Limiter
is active (when Knee = Var).
Desat Off, On Off User 3 Scene Switches Desaturation on or off. This
desaturates color above Knee to cancel out
unwanted color casts.
Desat Level 0..99 50 User 3 Scene Sets Desaturation level (0=no desaturation, 99
= maximum desaturation)
Auto Point 0..99 30 Service Scene Sets the point where compression starts
(when Knee = Auto)
Auto Ref 0..99 30 Service Scene Sets the reference level for Knee (when Knee
= Auto)
Flare
Flare Off, On On User 3 Scene Switches flare correction on or off.
Red 0..99 10 User 3 Scene Sets flare correction for Red.
Green 0..99 15 User 3 Scene Sets flare correction for Green.
Blue 0..99 25 User 3 Scene Sets flare correction for Blue.
Color
Color Adjustment
Col Corr
Col Corr Off, On Off User 3 Scene Switches color corrector on or off. All active
sets are used when color corrector is on.
Col Corr View Off, On Off User 3 — Switch on to view the selected color area in
the main signal.
VF View Off, On Off User 3 Oper Switch on to view the selected color area in
the viewfinder.
Set 1,2,3
1)
,4
1)
,5
1)
,6
1)
1 User 3 — Selects a color correction set.
Set On/Off Off, On Off User 3 — Switches the selected color corrector set on or
off. Note: when off, settings can not be
changed.
Color 0..359.99 0 User 3 — Sets the color area by hue (in steps of 22.5
degrees)
Width 22.50..360 101 User 3 — Sets the color area hue width (in degrees).
Hue -180..180 112 User 3 — Sets the hue (in degrees) for the selected
area.
Sat 0..99 0 User 3 — Sets the saturation level for the selected area.
Luminance 0..99 0 User 3 — Sets the luminance level for the selected area.
Color Name B+, MG-, MG,
MG+, R, R+, YL-,
YL, YL+, G-, G, G+,
CY, CY+, B-, B
MG- User 3 — Displays color area name:
B: Blue; MG: Magenta; R: Red; YL: Yellow;
G: Green; CY: Cyan
Smoothing Sharp, Medium,
Smooth
Medium User 3 — Selects method for smoothing transitions
between affected and nonaffected areas.
Reset Exec, .. Exec User 3 — Resets the color corrector to its default values.
All sets are reset.
Col Protect
Menu item Values Default Level File Description
To Next Page
Loading...
