11 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
• Due to safety and licensing reasons (CE), any reconstruction and/
or modification of the product is prohibited.
• Only use the components and spare parts that we recommend.
Always use matching, original Graupner plug-in connections of
the same design and material.
• Make sure that all of the plug-in connections are tight. When dis-
connecting the plug-in connections, do not pull the cables.
• Protect the receiver from dust, dirt, moisture and foreign parts.
It must be protected from vibration as well as excessive heat or
cold. The models may only be operated remotely in normal out-
side temperatures such as from -10°C to +55°C.
• Always use all your HoTT components only with the latest firm-
ware version.
• If you have questions which cannot be answered by the operat-
ing manual, please contact us or another expert in the field.
WARNING
Also while programming, make sure that a connected electric
motor cannot accidentally start. Risk of injury by rotating propel-
lers or rotor!
Avoid impacts and crushing. Check the receiver regularly for dam-
ages to the housings and cables, specially after model crashes.
Damaged or wet receiver, even if re-dried, should no longer be
used!
To Next Page
Loading...
Need help?
General
