49 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
Afterwards, click on the "File" button to load the corresponding firm-
ware file from the hard disk. The file name of the firmware compat-
ible with the receiver to be updated always starts with "« receiver
name »_« order number »_xxx", for example with "Falcon12_S1034_
xxx_xxx".
After loading the compatible file, click the "Start" button ...
... and then turn on the receiver.
(In practice, the receiver can be connected earlier, it must not be
switched on before clicking the "Start" button.)
The progress bar shows that the transfer is running normally. Depend-
ing on the receiver, its LED indicates the progress of the update.
To Next Page
Loading...
