Need help?Do you have a question about the GRAVOGRAPH M20 PIX and is the answer not in the manual?
General| Materials | plastics, ceramics, glass, and more |
|---|---|
| Application | Engraving |
| Supported Materials | plastics, glass, and more |
| Software | Gravostyle |
| Power Supply | 50/60 Hz |
Expresses thanks for choosing the M20 series engraving machines.
Provides essential guidance for safe and productive equipment operation and maintenance.
Introduces the M20 series as electronic engraving machines featuring the IQ+ concept for speed.
Explains how to identify the specific marking equipment using its rear-mounted identification plate.
Details crucial safety measures for handling the machine and operating the M20 ABC touch-screen.
Specifies requirements for placing the machine on a stable surface and ensuring adequate workspace.
Provides instructions for safe and interference-free electrical power and grounding connections.
Details how to connect the power supply unit to the machine and the mains socket.
Explains the procedure for connecting the engraving machine to a PC via USB cable.
Guides the user through the physical installation and wiring of the Touch Pad for the M20 ABC model.
Covers machine power-on, problem resolution, power-down, restarting, and program installation.
Describes the process of transferring engraving designs from software to the machine.
Provides instructions on selecting appropriate jigs and positioning objects for accurate engraving.
Details spindle pressure adjustment and using a regulating nose for flat engraving operations.
Explains the specific tool holder adjustment process for wedding ring engraving on the M20 JEWEL.
Guides the user through the process of safely mounting and securing a cutter onto the machine's tool holder.
Explains how to store the zero point for the Z axis or tool carrier, essential for accurate positioning.
Details how to set the desired engraving depth using the scaled knob and index pin.
Describes how to initiate the engraving cycle using the machine's control panel.
Covers essential cleaning, safety precautions, and routine checks for machine upkeep.
Explains how to perform XY and Z axis adjustments for accurate machine calibration.
Details the specific XY calibration process required for wedding ring engraving on the M20 JEWEL.
Provides step-by-step instructions for safely removing and replacing the diamond tip on the M20 JEWEL.
Guides the user through the procedure for safely removing and reattaching the machine's chuck.
Lists dimensions, weights, and engraving areas for various M20 series models.
Details parameters such as vice opening, spindle passage, and engraving precision across models.
Specifies the machine's noise levels as measured according to the ISO 11201 standard.
Outlines the machine's electrical requirements, including voltage, current, and power consumption.
Defines the recommended operating temperature and humidity levels for optimal machine performance.
Describes the laser diode type, wavelength, power output, and safety class.
Lists the various connection types available for computers, control panels, and screens.
Details the dimensions, weight, control interface, and battery specifications for the M20 ABC Touch Pad.
Lists optional accessories that can enhance the machine's functionality, such as the tailstock.
To Next Page
