Need help?Do you have a question about the GRAVOGRAPH LS900 Edge and is the answer not in the manual?
Covers personnel safety, machine classification, and general laser hazard precautions.
Explains safe usage of the Class 4 pass-through kit and mandatory eye protection.
Details specific hygiene and safety instructions for the laser controlled zone.
Provides essential safety guidelines for operating the laser machine.
Specifies when safety goggles are necessary and user responsibilities.
Details safety precautions for handling and cleaning optical components like ZnSe lenses.
Outlines emergency steps for dealing with a broken lens, including ventilation and cleanup.
Discusses hazards from marking certain materials and lists sensitive material types.
Warns about toxic fumes and particles emitted during marking and recommends extraction.
Guides on selecting a suitable location, ensuring stability, and providing adequate ventilation.
Explains the importance and setup of the fume and gas extraction system.
Covers safe electrical connection, grounding, and avoiding interference.
Guides on connecting the machine's power supply and extraction system link cable.
Guides on connecting the machine to a PC using a USB cable.
Identifies and explains the functions of the buttons on the machine's control panel.
Describes the process of transferring files from the PC to the machine via USB.
Explains the autofocus function for adjusting focal height and its usage.
Recommends wearing specific safety glasses for Class 4 laser operation.
Outlines general maintenance tasks, emphasizing safety and regular cleaning.
General| Technology | CO2 Laser |
|---|---|
| Cooling System | Air-cooled |
| Type | Laser Engraver |
| Maximum Engraving Speed | 1000 mm/s |
| Repeatability | ±0.01 mm |
| Connectivity | Ethernet, USB |
| Software | Gravostyle |
| Supported File Formats | AI, DXF, PLT, BMP, JPG |
| Materials | Acrylic, Wood, Glass, Leather, Anodized Aluminum, Plastic |
| Power Requirements | 50/60 Hz |
To Next Page