GRAVOGRAPH L-Solution 900 - User Manual

Before installing and using this
machine, you must read this user
guide carefully.
Keep it in a safe place, in case you
need to refer to it later.
E8147 703 - 09.2007 - ENG - (UPDATED EDITION NUMBER : 3)
( Please read carefully before use )
User manual
L-SOLUTION
700 / 800 / 900
Machines
LASER engraving machines
First contact

Summary

Regulatory Information

Electrical Safety Standards

Covers electrical safety compliance with EN 60204-1 and EN 60950.

Overview of the L-SOLUTION Machine

Key Contra-indications

Lists critical safety warnings and prohibitions for safe operation of the machine.

LASER Safety Precautions

Laser Radiation Hazards and Labels

Explains laser types, hazards, safety features, and warning labels on the equipment.

Installation Guide

Physical and Environmental Setup

Guidelines for placement, environment, ventilation, and temperature.

System Requirements and Recommendations

Covers exhaust, air assist, computer, software, and font requirements.

Electrical Setup and Connections

Details electrical installation and machine connections.

Powering, Troubleshooting, and Jamming

Procedures for powering, jamming, and basic troubleshooting.

Setting Up Computer Transmission

Transmission Connection Methods

Covers USB, Parallel, and Serial port connections.

Printer Driver Functions and Configuration

Driver Installation and Setup

Covers installing the Windows driver and setting up serial transmission.

Core Driver Controls and Settings

Explains driver interface, LASER settings, graphics modes, and rubber engraving.

Advanced Features and Material Settings

System Operation and Control

Running the Machine: Step-by-Step Guide

Preparation and File Transfer

Powering on, graphics, drivers, download.

Material Handling and Focusing

Starting Engraving and Post-Process

Initiating engraving, removing material.

Troubleshooting Machine Operation

Materials for LASER Engraving

Material Safety Precautions and Notices

Critical safety warnings and usage notes.

General Machine Maintenance

Cleaning Supplies and System Cleaning

Optics Cleaning and Maintenance Schedule

Cleaning optics and maintenance frequency.

Autofocus Adjustment Procedure

Re-aligning the Autofocus System

Steps to correct autofocus issues by re-aligning the machine's focus system.

GRAVOGRAPH L-Solution 900 Specifications

General

Type	Laser Engraver
Laser Type	CO2 Laser
Resolution	Up to 1000 dpi
Software	Gravostyle
Connectivity	USB, Ethernet
Supported Materials	Wood, Acrylic, Glass, Leather, Anodized Aluminum, Plastics