To Next PageTo Next Page
Need help?Do you have a question about the GRAVOGRAPH L-Solution 800 and is the answer not in the manual?
Discusses electrical safety standards and precautions for machine operation.
Details mains plug connection, grounding, and essential safety guidelines.
Lists critical safety warnings and prohibited actions for safe operation.
Explains laser classification, safety interlocks, and mandatory warning labels.
Advises on machine placement, environment, ventilation, and clearance.
Specifies requirements for proper fume and smoke extraction during operation.
Lists minimum hardware and OS specifications for the host computer.
Covers powering the machine on/off and basic troubleshooting for startup issues.
Explains how to connect the machine to a computer for data transfer.
Guides on connecting the machine to the PC using a USB cable.
Guides on connecting the machine to the PC using a parallel cable.
Provides guidelines for connecting the machine to the appropriate power supply.
Details the procedure for connecting exhaust, input/output, and power cables.
Details the process of installing the driver on Windows 2000, XP, or 98.
Guides on configuring serial communication settings in Windows 2000 for data transfer.
Explains the functions and controls available in the printer driver interface.
Describes how to adjust laser parameters like power, speed, and DPI.
Describes different modes for converting and engraving graphics like automatic, fill, and B&W.
Details color, power, speed, refocusing, and pass settings for engraving.
Explains how to access and adjust engraving parameters like power and speed.
Guides on preparing graphics and sending them to the laser for engraving.
Describes how to place material and focus the laser beam for accurate engraving.
Details the steps before and during the start of the engraving process.
Explains how to clean optics and provides guidance on maintenance frequency.
Describes the steps to re-align the autofocus system on the laser machine.
General| Laser Type | CO2 |
|---|---|
| Technology | Laser |
| Software Compatibility | Gravostyle |
| Connectivity | Ethernet, USB |
| Supported Materials | Wood, acrylic, glass, plastic, leather, rubber, anodized aluminum |
| Software | Gravostyle |
| Power Supply | 220V, 50/60Hz |
| Laser Power | 30W, 50W |
