GRAVOGRAPH L-Solution 800 - Autofocus and Wood Engraving

L-SOLUTION 700 / 800 / 900 machines . 60 First contact
Autofocus
(pict. 1)
Once selected, autofocus is effected automatically each time engraving is started.
Deactivate the Autofocus function when you want to engrave a large set of plates of
the same thickness. This will allow you to save time in measuring or you will only do
an autofocus for the first of these plates.
Wood
(pict. 2)
Select this Wood function when you want to engrave a piece of hardwood.
Printer driver