HackRF
(continued from previous page)
make
sudo make install
sudo ldconfig
If you have HackRF hardware, you may need to update the firmware to match the host tools versions.
3.2.4 Windows
Prerequisites for Cygwin, MinGW, or Visual Studio
• cmake-2.8.12.1 or later from http://www.cmake.org/cmake/resources/software.html
• libusbx-1.0.18 or later from http://sourceforge.net/projects/libusbx/files/latest/download?source=files
• fftw-3.3.5 or later from http://www.fftw.org/install/windows.html
• Install Windows driver for HackRF hardware or use Zadig see http://sourceforge.net/projects/libwdi/files/zadig
– If you want to use Zadig select HackRF USB device and just install/replace it with WinUSB driver.
Note for Windows build: You shall always execute hackrf-tools from Windows command shell and not from Cygwin
or MinGW shell because on Cygwin/MinGW Ctrl+C is not managed correctly and especially for hackrf_transfer the
Ctrl+C (abort) will not stop correctly and will corrupt the file.
For Visual Studio 2015 x64
Create library definition for MSVC to link to C:\fftw-3.3.5-dll64> lib /machine:x64 /def:libfftw3f-3.
def
c:\hackrf\host\build> cmake ../ -G "Visual Studio 14 2015 Win64" \
-DLIBUSB_INCLUDE_DIR=c:\libusb-1.0.21\libusb \
-DLIBUSB_LIBRARIES=c:\libusb-1.0.21\MS64\dll\lib\libusb-1.0.lib \
-DTHREADS_PTHREADS_INCLUDE_DIR=c:\pthreads-w32-2-9-1-release\Pre-built.2\include \
-DTHREADS_PTHREADS_WIN32_LIBRARY=c:\pthreads-w32-2-9-1-release\Pre-built.2\lib\x64\
˓→pthreadVC2.lib \
-DFFTW_INCLUDES=C:\fftw-3.3.5-dll64 \
-DFFTW_LIBRARIES=C:\fftw-3.3.5-dll64\libfftw3f-3.lib
CMake will produce a solution file named HackRF.sln and a series of project files which can be built with msbuild
as follows: c:\hackrf\host\build> msbuild HackRF.sln
Cygwin
mkdir host/build
cd host/build
cmake ../ -G "Unix Makefiles" -DCMAKE_LEGACY_CYGWIN_WIN32=1 -DLIBUSB_INCLUDE_DIR=/usr/
˓→local/include/libusb-1.0/
make
make install
3.2. Building from source 7
To Next Page
Loading...