123
U-Match Series DC
Inverter Service Manual
'LVDVVHPEO\RI¿[LQJSODWHVXEDVV\IRUDLUVZHHSLQJIDQV
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
Step Illustration Handling Instruction
'LVDVVHPEO\RI¿[LQJ
plate sub-assy for air
sweeping fans
Remove the display board, mounting support
and mounting plate of swing motor in turn.
Disassembly of fan and motor components
Remark: Make sure that the power supply is cut off before disassembling and protect all
the parts during disassembly, especially the fastening screws for fans.
Step Illustration Handling Instruction
1. Disassembly of front
and back scroll cases
Press the buckle at the joints of front and back
scroll cases with hands and pull upward to remove
the front scroll case. Then remove the screws on
the back scroll case. Lift the buckle of back scroll
case with hands and remove it. (As is shown in the
graph, circle represents 2 screws on left and right.)
Disassembly of fan and motor components
Remark: Make sure that the power supply is cut off before disassembling and protect all
the parts during disassembly, especially the fastening screws for fans.
Step Illustration Handling Instruction
2. Disassembly of fans
Unscrew the 2 screws of coupling, take out
the rotating shaft and louver, then loosen the
tighten screw of louver to remove the louver.
3. Disassembly of
EHDULQJ¿[LQJSODWHV
Unscrew the 3 screws and 2 nuts of support
to remove the mounting support
4. Disassembly of motor
Loosen the 2 screws of the motor attaching clamp,
remove the motor attaching clamp and motor
attaching clamp subassembly to remove the motor.
'LVDVVHPEO\RIULJKWDQGOHIW¿[LQJSODWHV
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
Step Illustration Handling Instruction
Disassembly of right
DQGOHIW¿[LQJSODWHV
'LVDVVHPEOHWKHEROWVRQULJKWDQGOHIW¿[LQJSODWHV
with tools. (As is shown by the arrow in the graph.)
To Next Page
Loading...
