Gree GMV-24WL/C-T

GREE DC Inverter Side Discharge VRF Ⅱ for North America
122
Remival operation for eletronic expansion valve
Remark: Before removing the electronic expansion valve, please make sure that there’s no refrigerant in th pipeline of
system and the power is disconnected
Process
Photo
Operation Instruction
1. Disconnec
the electronic
expansion valve
from the
pipeline
● Remove the coil of
electroc expansion
valve at first
● Weld the
connection pipe for
expansion valve, and
then pull out the
connection pipe
Note： During
welding process, do
not let flame burn out
other parts
2. Take out the
electronic
expansion valve
and replace it
●Take out the
electronic expansion
valve and replace it
3. Replace
electronic
expansion valve
● Weld the
connection pipe of
electronic expansion
valve
● Inistall the coil of
electronic expansion
valve
Note； During
welding process, do
not let the flame burn
out other parts