Gree GMV-24WL/C-T

GREE DC Inverter Side Discharge VRF Ⅱ for North America
131
Removal operation for 4-way valve
Remark: Before removing the 4-way valve, please make sure that there’s no refrigerant inside the pipeline of system
and then power is disconnected.
Process
Photo
Operation Instruction
2.Disconnect
the 4-way valve
and connection
pipeline
Weld those 4
connection spots on
4-way valve, and
then pull out the
connection pipe
Note: During welding
process, do not let
the flae burn out
other parts
3. Replace
4-way valve
Replace 4-way
valve
Note: During welding
process, do not let
the flame burn out
other parts
4. Replace
4-way valve
Weld the connection
position between
4-way valve and
pipeline
Note: During welding
process, do not let
flame burn out other
parts