Unit Control
●When it is set to ―
On
‖, it will automatically back to ―
Off
‖ when the main unit is turned off; while it is set to
―
Timer
‖, this setting will remain when the main unit is turned off and can only be canceled manually.
●It will be memorized upon power failure.
3.2.2.6 Weather Depend
[Operation Instructions]
★
At the function setting page, by touching ―
Weather depend
‖, there will be a choice box, where it is
able to set it to ―
On
‖ or ―
Off
‖, and also it is able to set the weather-dependent temperature.
Page of the Weather Depend
[Notes]
●When ―
Weather depend
‖ has been activated; it cannot be deactivated by ON/OFF operation but
done manually.
●It is available to find the weather-dependent target temperature at that parameter viewing pages.
●When this function has been activated, it is still allowed to set the room temperature, however, this
setting becomes valid only when ―
Weather depend
‖ has been deactivated.
●This function can be set to ―
On
‖ no matter the unit is turned on or off, but works only when the unit is
turned on.
●This function only works for air conditioning. Under the ―
Hot water
‖ mode, it cannot be activated.
●It will be memorized upon power failure.
3.2.2.7 Weekly Timer
[Operation Instructions]
★
1. At the function setting page, by touching ―
Weekly timer
‖, it will go to the setting page as shown
below.
★
2. At the ―
Weekly timer
‖ setting page, as shown in the figure below, the weekly timer can be set to ―
On
‖
or ―
Off
‖.
★
3. At the ―
Weekly timer
‖ setting page, by touching the desired day (Monday ~ Sunday) it will access to
To Next Page
Loading...
