Gree MULTI VRF SYSTEM II GMV-120WL/A-T

71
DC Inverter Multi VRF System II
Service Manual
Cut-off valve
It used for connecting indoor unit and outdoor unit, and
used for maintenance and installation.
5.2 Removal of key parts
5.2.1GMV-120WL/A-T, GMV-140WL/A-T, GMV-160WL/A-T series unit
Removal operation for panel
Remark: Before removing the panel, please make sure that the unit is disconected with the power
Process Photo Operation Instruction
1. Remove
top cover
● Loose the screws xing the top cover with
screwdriver
● Hold the top cover upwards and then put it on
the oor atly
2. Remove
front side
plate sub-
assy
● Loose the screw xing the front side plate with
screwdriver
● Hold the front side plate upwards and then put it
on the oor atly
3. Remove
front panel
and grille
● Loose the screws xing the front panel and grille
with screwdriver
● Put the front panel and grille on the oor atly
4. Remove
left side
plate and
rear side
plate
● Loose screws xing left side plate and rear side
plate with screwdriver
● remove the rear side plate