A/A DC INVERTER U-MATCH AIR CONDITIONERS MAINTENANCE
175
3. Loosen the screws between the
electric box and side panel and
motor base.
Loosen the screws between the
electric box and side panel and
motor base with a screw driver.
4. Remove the electric box
sub-assembly
● Move the electric box
sub-assembly upward from the
middle isolation plate.
5. Mount a new electric box
sub-assembly
● Assemble the new electric
box sub-assembly to correct
position
● Use the screwdriver to fix the
electric box sub-assembly to
middle isolation plate and rear
side plate according to
disassembly procedures.
6. Connect the power cable of
each component
● Connect the wires of each
component to correct position
according to disassembly
procedures. For details, please
refer to the wiring diagram.
To Next Page
Loading...
