A/A DC INVERTER U-MATCH AIR CONDITIONERS MAINTENANCE
217
Model：GTH48K3CI 、GTH60K3CI
Disassembly of panel grating module
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during
disassembly. Do not put filter screen near the high temperature heat source.
Step Illustration Handling Instruction
Disassembly of
sub-assy of front
grill
●Unscrew the 2 clasps
of the upper grill and
the 2 screws of the
clasps.
●Open the grill,
disassemble the 2
down clasps to
remove the grill
Disassembly of right and left finishing plates
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly.
Do not scratch the outer parts.
Step Illustration Handling Instruction
Disassembly of
right and left
finishing plates
●Disassemble the
screws as shown in the
graph with screwdriver
and then push upward
to remove the right and
left finishing plates.(As
is shown in the graph,
arrow represents the
position of screws.)
Disassembly of panel parts
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly.
Do not scratch the outer parts.
Step Illustration Handling Instruction
Disassembly of
panel parts
●Unscrew the 3 sides’
screws on the cover to
remove the cover.
To Next Page
Loading...
