A/A DC INVERTER U-MATCH AIR CONDITIONERS MAINTENANCE
218
Disassembly of sub-assy of electric box
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during
disassembly, especially the components inside the box in case of water and hit.
Step Illustration Handling Instruction
1. Disassembly
of electric box
cover
●Disassemble 3 screws
as shown by the arrow in
the graph on left and
remove the electric box
cover.
Disassembly of air deflecting plate modules
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly,
especially the joints of the air deflecting plate.
Step Illustration Handling Instruction
Disassembly of
sub-assy of air
deflecting plate
●Remove the air
deflecting plates from
the air deflecting plate
support assembly, and
then remove both ends
from the air sweeping
motor. joint (As is
shown in the graph,
arrow represents the
support assembly and
circle the air sweeping
motor joint.)
Disassemble of water-containing plate modules
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly.
Step Illustration Handling Instruction
Disassemble of
water-containin
g plate modules
●remove the
water-containing plate
modules.
To Next Page
Loading...
