Wired Controller XE70-33/H
47
conservation.
In the functional page select “Save” to enter into Save function setting page, as
shown below:
Press “ ” or “ ” buton to switch option, when selecting the first option, press
“
” or “ ” button to turn on or turn off; when selecting the second option, press“ ” or “ ”
button to switch the mode; when selecting the third option, press“
” or “ ” button to
switch lower limit value of temperature or upper limit value of temperature, and then
press “ ” button to save the setting and return to the previous page.
When activating the Save function under Cool, Dry modes, the set temperature
in homepage should not be lower than the lower limit of Save temperature; when
activating the Save function under Heat, 3D Heat, and Space mode, the set
temperature in homepage should not be higher than the upper limit of Save
temperature.
7.6.4 Setting of Filter Clean Reminder
Filter Clean Reminder: Air conditioner can record its running time and when it
To Next Page
Loading...
