Gree XE70-33/H

Wired Controller XE70-33/H
48
reaches to a certain time, unit can remind user to clean filter. A dirty filter will cause
poor cooling and heating effect, malfunction or even generate bacteria.
On the function interface, select "Clean" to enter the setting of filter cleaning
reminding function, as shown below:
Press “
” or “ ” button to switch to a different selection. When selecting the
first item, press “ ” or “ ” to select ON or OFF. When selecting the second item, press
“ ” or “ ” to switch to a cleaning degree of the current environment (A, B, C). When
selecting the third item, press “
” or “ ” to adjust the clean cycle. The range of filter
clean cycle is 0~9. Press " " to save the setting and return to the previous page.
Filter cleaning reminding time is related to the cleaning degree of current
environment and the clean cycle. There are 4 types of filter cleaning condition:
(1) Filter cleaning reminder is OFF;
(2) Light pollution: Cleaning degree of current environment is “A”. When clean
cycle is “0”, the accumulative running time is 5500 hours. Every increase of
"1" indicates an increase of 500 hours in running time. When clean cycle is
"9", the accumulative running time is 10000 hours;