Gree XE71-42/G

Wired Controller XE71-42/G
11
Under on status, press “SWING” button to select up&down swing, then press
“SWING” button, Up&down swing angle will be adjusted circularly as below:
Figure 4-6 Up&Down Swing
Select up&down swing and left&right swing through “
˂
” or “
˃
” button. When
left&right swing is selected. Left&right swing angle will be adjusted circularly as
below:
Figure 4-7 Left&Right Swing
NOTES!
(1) Turn on fixed-angle swing mode in function setting page.
(2) If fixed-angle swing is not available for the model, fixed-angle swing
will be invalid when the wired controller turns on fixed-angle swing
mode.
Simple swing mode: when fixed-angle swing mode is turned off, swing operation
is as below:
Under on status, press “SWING” button and the focus frame will appear. Press
“
˂
” or “
˃
” button to select up&down swing or left&right swing. Press “SWING” button
to turn on or turn off up&down swing or left&right swing. Swing icon will be displayed
when swing function is turned on. Otherwise, swing icon will not be displayed.