Wired Controller XE71-42/G
26
which is a normal phenomenon. During cleaning, please make sure the room is well
ventilated to avoid affecting the degree of comfort.
When self-cleaning function is turned on, all buttons can’t be operated. If it needs
to turn off the self-cleaning function compulsively, press any button on the homepage
and a prompt message will appear, and then press “MENU/OK” button to turn off the
self-cleaning function.
NOTES!
(1) The self-cleaning function can only work under normal ambient
temperature. If the room is dusty, it is recommended to clean once a
month; if not, it is recommended to clean once every three months.
After the self-cleaning function is turned on, you may leave the room.
When self-cleaning is finished, the air conditioner will enter standby
mode.
(2) This function is applicable for some models.
4.8 Unit Status View
Press “MENU/OK” button to enter into the menu and select the function symbol
to be viewed. Then press “MENU/OK” button to enter view function page. Press “
˄
” or
“
˅
” button to select status view function. Press “MENU/OK” button to enter unit status
view page. Press “ON/OFF” button to return to the previous page. Please refer to the
Fig. as below.
To Next Page
Loading...
