Wired Controller XE71-42/G
28
The following statuses can be viewed: if defrosting is operating; if auxiliary
heating is operating; residual time of filter cleaning reminder; indoor ambient
temperature; outdoor ambient temperature.
NOTES!
(1) The residual time of filter cleaning reminder is valid only when the
cleaning reminder function is turned on.
(2) If there isn’t outdoor ambient temperature sensor for the unit or the
sensor detection hasn’t started to work, the outdoor ambient
temperature view parameter is invalid.
4.9 Current Error View
When error occurs in the unit, error symbol will be displayed on the main page of
wired controller. In this case, you can enter error view page to view the current error.
Press “MENU/OK” button to enter the menu and select the function symbol to be
viewed. Then press “MENU/OK” button to enter view function page. Press “
˄
” or “
˅
”
button to select error information. Press “MENU/OK” button to enter error information
page. When there are many errors, press “
˄
” or “
˅
” to turn pages. Press “ON/OFF”
button to return to the previous page. Please see the Fig. as below.
To Next Page
Loading...
